NEWAGE CASTING
  • HOME
  • PRODUCTS
    • Cast Iron >
      • No-Hub Pipe & Fittings
      • Service Weight Pipe & Fittings
    • Epoxy Cast Iron >
      • Epoxy No-Hub Pipe & Fittings
      • Epoxy Service Weight Pipe & Fittings
    • PRO-TEC CAST IRON
    • No-Hub Couplings
    • Compression Gaskets
    • Epoxy Tape & Epoxy Touch-Up Paint
  • RESOURCES/DOCS
    • Submittals & Specifications
    • Brochures & Catalogs
    • Price Lists
    • Listings & Certifications
  • SALES/SUPPORT
    • CUSTOMER SERVICE
    • REGIONAL MANAGERS
    • Manufacturer Reps
  • ABOUT
    • CONTACT US
    • CORPORATE RESPONSIBILITY
NO-HUB COUPLINGS
Picture
Click image to download.
STANDARD COUPLINGS
CERTIFICATIONS & STANDARDS
NewAge Casting’s No-Hub Coupling meet or exceed the requirements of ASTM C 564, ASTM C 1277
and applicable portions of the Uniform Plumbing Code (UPC) and the International Plumbing Code (IPC)
NewAge Casting’s No-Hub Couplings are listed by IAPMO R&T - File Number 4775

MATERIAL SPECIFICATION
Screw Type 305 AISI Stainless Steel 3/8”
Shield Type 304 AISI Stainless steel, corrugated. Shield thickness 008”
Bands Type 304 AISI Stainless Steel
Gasket Primary Elastomeric Polymer is Neoprene to meet ASTM C564
Screw Housing Type 304 AISI stainless-steel

MATERIAL SPECIFICATION
Standard Couplings for NewAge Casting shall conform to the requirements contained in the latest edition of ASTM C1277. Shield assembly, clamp, band and screw housing shall be made from series 301 stainless steel and the screw made from series 305 stainless steel. Gaskets shall be made from high quality Neoprene and shall comply with requirements contains in the latest edition ASTM C564. Couplings shall be marked with UPC®. These couplings standard and reducing, shall be used in joining the hubless cast iron soil pipe and fittings in a Hubless Cast Iron Sanitary System. Joints shall be tightened to the proper torque in inch pounds by the use of calibrated torque wrench. After installation the system shall be hydrostatically tested to a 10-foot head of water. Air test (compressed air or gas) is not recommended.
STANDARD COUPLINGS
  1. All NewAge standard coupling components meet or exceed ASTM C 564, ASTM C 1277 and CISPI 310 for shielded couplings.
  2. ASTM C 564 defines the gasket properties for the no-hub shielded coupling.
  3. ASTM C 1277 describes the materials and testing for couplings in the use of joining no-hub cast iron soil pipe and fittings.
  4. Details:
    1. NewAge standard coupling gasket is made from a vulcanized compound.  The primary elastomer is polychlorprene (neoprene).
    2. The shield assembly, clamp and screw housing are made from Type 301 AISI stainless steel and is 0.007” thick.
    3.  The 5/16” hex-head screw is made from Type 305 AISI stainless steel.
    4. The torque rating for all standard couplings is 60 in-lbs.
    5. The number of clamps per coupling is shown below.
    6. The use of polychloroprene and stainless-steel components makes the NewAge standard coupling highly corrosion resistant.
    7. The design of both the gasket and the shield prevents longitudinal and shear type de-coupling.
CLAMPS PER COUPLING
COUPLING SIZE
NUMBER OF CLAMPS
1-1/2"
2
2"
2
3"
2
4"
2
5"
4
6"
4
8"
4
10"
4
12"
4
15"
4
2" x 1-12"
2
3" x 2"
2
4" x 2"
2
4" x 3"
2

Picture
Click image to download.
HEAVY DUTY COUPLINGS
CERTIFICATIONS & STANDARDS
• 
Meets ASTM C 1540
• Meets ASTM C 564
• Meets CSA B 602
• Products are IAPMO and CSA Listed

MATERIAL SPECIFICATION
Screw Type 305 AISI Stainless Steel, 5/16” hex head/shoulder
Shield Type 301 AISI Stainless Steel Bright Annealed, Hardness - Rockwell B85 max
Band Type 301 AISI Stainless Steel, minimum tensile 165,000 psi for 1-1/2” to 15”

Gasket Primary Elastomeric Polymer is Neoprene to meet ASTM C564
Screw Housing Type 301 AISI stainless-steel

MATERIAL SPECIFICATION
The NewAge Heavy (HD) Duty Couplings compliment the NewAge Cast Iron Soil Pipe System. The NewAge HD Couplings are manufactured and tested to meet and exceed the ASTM C1540 standard. The gasket is made from properly vulcanized virgin elastomeric compound, where the primary material is polychloroprene (neoprene). The gasket is a one-piece design tested to meet the physical requirements of ASTM C564. The corrugated shield is made from Type 304 stainless steel and provides a sturdy design which is to be installed with a pre-set torque wrench calibrated at 80 inch-pounds to accommodate the 3/8” hex head screws, four (1-1/2” through 4”) and six (5” through 15”) respectively. The stainless-steel bands are of 3/4” wide with 304 stainless steel screw housing provides sealing torque. The couplings are tested to ASTM C1540 and are listed with IAPMO.

Picture
Click image to download.
EXTRA HEAVY DUTY COUPLINGS
CERTIFICATIONS & STANDARDS
• 
Meets ASTM C 1540
• Meets ASTM C 564
• Meets CSA B 602
• Products are IAPMO and CSA Listed

MATERIAL SPECIFICATION
Screw Type 305 AISI Stainless Steel 3/8”
Shield Type 304 AISI Stainless steel, corrugated. Shield thickness 008”
Bands Type 304 AISI Stainless Steel
Gasket Primary Elastomeric Polymer is Neoprene to meet ASTM C564
Screw housing Type 304 AISI stainless-steel

MATERIAL SPECIFICATION
The NewAge Extra Heavy (XH) Duty Couplings compliment the NewAge Cast Iron Soil Pipe System. The NewAge XH Couplings are manufactured and tested to meet and exceed the ASTM C1540 standard. The gasket is made from properly vulcanized virgin elastomeric compound, where the primary material is polychloroprene (neoprene). The gasket is a one-piece design tested to meet the physical requirements of ASTM C564. The corrugated shield is made from Type 304 stainless steel and provides a sturdy design which is to be installed with a pre-set torque wrench calibrated at 80 inch-pounds to accommodate the 3/8” hex head screws, four (1-1/2” through 4”) and six (5” through 15”) respectively. The stainless-steel bands are of 3/4” wide with 304 stainless steel screw housing provides sealing torque. The couplings are tested to ASTM C1540 and are listed with IAPMO.

Picture
Click image to download.
EDPM EXTRA HEAVY DUTY COUPLINGS
CERTIFICATIONS & STANDARDS
•
 Meets ASTM C 1540 excluding gasket material
• Meets CSA B 602
• Products are IAPMO and CSA Listed

MATERIAL SPECIFICATIONS
Screw Type 305 AISI Stainless Steel 3/8”
Shield Type 304 AISI Stainless steel, corrugated. Shield thickness 008”
Bands Type 304 AISI Stainless Steel
Gasket Primary Elastomeric Polymer is EPDM
Screw Housing Type 304 AISI stainless steel

TECHNICAL SPECIFICATIONS
The NewAge EPDM Extra Heavy (XH) Duty Couplings compliment the NewAge Epoxy System. The NewAge EPDM XH Couplings are manufactured and tested to meet and exceed the ASTM C1540 excluding the gasket material portion of the standard. The gasket is made from ethylene propylene diene monomer and is a gasket of one-piece design tested to meet the physical requirements of ASTM C564. The corrugated shield is made from Type 304 stainless steel and provides a sturdy design which is to be installed w/a pre-set torque wrench calibrated at 80 inch-pounds to accommodate the 3/8” hex head screws, four (1-1/2” through 4”) and six (5” through 15”) respectively. The stainless-steel bands of 3/4” width with 304 stainless steel screw housing provides sealing torque. The couplings are tested to ASTM C1540.
PRODUCTS
Cast Iron
Epoxy Cast Iron
Pro-Tec Cast Iron
No-Hub Couplings
Compression Gaskets
Epoxy Tape & Epoxy Touch-Up Paint
RESOURCES & DOCS
​Price Lists
Submittals & Specs
Brochures & Catalog
Listings & Certs
SALES & SUPPORT
​Customer Service
Regional Managers
Manufacturer Reps
ABOUT
​Contact Us
Corporate Responsibility

NewAge Casting Headquarters  •  12630 West Airport Blvd.  •  Ste. 100  •  Sugar Land, TX 77478
Toll Free: (866) 791-7055  •  Tel: (281) 565-0928  •  Fax: (281) 565-0929  •  Email: info@newagecasting.com
Copyright © 2022 NewAge Casting - All rights reserved.
  • HOME
  • PRODUCTS
    • Cast Iron >
      • No-Hub Pipe & Fittings
      • Service Weight Pipe & Fittings
    • Epoxy Cast Iron >
      • Epoxy No-Hub Pipe & Fittings
      • Epoxy Service Weight Pipe & Fittings
    • PRO-TEC CAST IRON
    • No-Hub Couplings
    • Compression Gaskets
    • Epoxy Tape & Epoxy Touch-Up Paint
  • RESOURCES/DOCS
    • Submittals & Specifications
    • Brochures & Catalogs
    • Price Lists
    • Listings & Certifications
  • SALES/SUPPORT
    • CUSTOMER SERVICE
    • REGIONAL MANAGERS
    • Manufacturer Reps
  • ABOUT
    • CONTACT US
    • CORPORATE RESPONSIBILITY